In life, the cable needs to be cut during use. In the conventional technology, when cutting the cable, the cable is directly cut by scissors or cutting pliers, but the end of the cable is cut. The signal line will be jagged, and the jagged signal line will make the subsequent connection unable to continue to be cropped again, which increases the workload.
Then there is a cable cutting machine, including a cutting device, the cutting device is provided with a cutting base, a cable placing groove is arranged at the top of the cutting base, a cutter groove is arranged in the cable placing groove, a cable fixing groove is arranged at the bottom of the cutting table, and the cable is fixe. There is a cutter hole in the groove, and the cutter is cut from the top to the bottom, which has a large damage to the blade and needs to be replaced frequently, and the utility model has high cost. However, the use of the above has saved a lot of work.