Fully automatic crimping machines are now produced by several companies, all of which look very much the same. It is difficult for customers to judge it directly from its appearance. Now many companies will use the fully automatic crimping machine, but they do not necessarily understand, so as an outsider, how do judge whether this fully automatic crimping machine is worth buying?

First of all, look at the parts of the material and configuration, these can determine whether the fully automatic crimping machine is good or not. For how long?

The main configurations of the fully automatic crimping machine are as follows:

1. Motor part is mainly servo motor, step motor, and closed-loop motor, a good configuration must be a high proportion of servo motor.

2. Then is the screw, slider, the good screw, and slider to ensure that the terminal machine movement accuracy, and durability.

3. And fully automatic crimping machine materials must be enough, if the fully automatic crimping machine is relatively light, or if the inside structure size, materials, and materials are not reasonable, then this machine will be used for a year or two at most if it is good, poor words only need one or two months terminal machine pressure on the depth of the shallow, the quality of the required line can not be processed.

How to test a fully automatic crimping machine?

The length of the wire to measure whether there will be a length of non-uniform or not with the input value can not be matched, of course, the length of the wire length here has an error value of 0.2 mm + (set length × 0.002 mm) general tolerance

The effect of stripping should be carefully observed whether the wire after fully automatic crimping machine stripping is not clean, the stripping is not aligned, whether the copper wire is injured, whether the skin is scratched, the wire has obvious zigzag and the length is different and so on.

The effect of crimping terminals, and fully automatic crimping machines mainly depends on the effect of crimping terminals.

Terminal appearance is askew, whether there is a package of glue depth?

Is the drawing force test up to standard?

Can the cross-section analysis of the crimped terminals meet the requirements?

If the terminal with other functions also needs to see if the function can meet the requirements.

Is the heat shrinkable tube sheathed and heat shrinkable to the specified position?

Can the sheath be put in place and pulled to the terminal?

Is the rubber case in place with a detection function?

In addition to these inspection methods, the choice of a fully automatic crimping machine, but also depends on the factory's production capacity and after-sales service.

Changzhou Hechang Intelligent Technology Co., Ltd. was established in 2005, our main products included fully automatic crimping machine. The company has a professional RD technical team, advanced processing technology and efficient after-sales service.