HC-1Q/2Q/3QFour points terminal crimping machine
    • HC-1Q/2Q/3QFour points terminal crimping machine
    • HC-1Q/2Q/3QFour points terminal crimping machine

Product information

structure and principle

 1. The pressing mechanism of the clamp is curve propulsion mechanism, and the force is transferred from four curves in the head cavity of the right clamp handle to four blocks, and the block moves in a concentric straight line. Press the front end of the block to press the contact body so that the wire and the contact body are pressed. The four head block moves in harmony, the indentation depth is consistent, and the quality of the wire and contact body is ensured reliably.

 2. The internal ratchet claw and rack are used to match the self-locking mechanism to ensure the consistency of the indentation. If the pressure is insufficient or the supply time is too short, the pressure block will not be returned because of the self-locking mechanism. At this time, the pressure should be adjusted or the air supply time should be increased, so that the pressure block moves to the gear position. Return to normal use.

3. The clamp has eight working gears. By lifting the dial (take out the pin first) and rotating, the pointer on the dial is pointed at the corresponding gear, the dial is lowered and confirmed that the dial is flat on the panel, Before we can start work.

Troubleshooting and cautions 

1. No rigid steel press joint or a solid or thick cylindrical piece shall be inserted into the pressure tooth cavity to press the joint wantonly, or when a small file is strayed into a large diameter contact body or jammed by a hard object in the tooth cavity, Please contact us.

2, working pressure 80-120 P.S. I. Maximum air pressure 120P.S.I. (5.5-8.3bar)

3, press, insert terminals and conductors, supply air to clamp body with pedal switch, release pedal after pressing, press block back in position, remove pressing body and press joint. The following is a sample of clamps.


E5PMUM7)FXNS@Y1[3FX`N7U.png HC-1Q

HC-1Q/2Q/3QFour points terminal crimping machine HC-2Q 3Q

J@)T$X8[@}HJ)N%BHN02VKF.png Crimping sample


Technical data sheet


型号 Type

HC-1Q四点压接机

Four points terminal crimping machine

HC-2Q四点压接机

Four points terminal crimping machine

 

HC-3Q四点压接机

Four points terminal crimping machine

适用线径

Wire size

20 AWG - 32AWG(0.52 mm²-0.03mm²)

12AWG - 26 AWG(3.33mm²-0.128 mm²)

8 AWG - 18 AWG(8 mm²-0.8 mm²)

调节盘档位

Adjustment plate gear

压头工作直径INCH/mm

Crimp head diameter

压头工作直径INCH/mm

Crimp head diameter

压头工作直径INCH/mm

Crimp head diameter


通 (on)

止 (off)

通(on)

止(off)

通(on)

止(off)

1

0.7/0.028

0.84/0.033

0.7/0.028

0.84/0.033

0.036/0.91

0.041/1.04

2

0.81/0.032

0.94/0.037

0.81/0.032

0.94/0.037

0.045/1.14

0.05/1.27

3

0.91/0.036

1.04/0.041

0.91/0.036

1.04/0.041

0.052/1.32

0.057/1.45

4

0.99/0.039

1.12/0.044

0.99/0.039

1.12/0.044

0.061/1.55

0.066/1.68

5

1.14/0.045

1.27/0.050

1.14/0.045

1.27/0.050

0.069/1.75

0.074/1.88

6

1.32/0.052

1.45/0.057

1.32/0.052

1.45/0.057

0.076/1.93

0.081/2.06

7

1.50/0.059

1.63/0.064

1.50/0.059

1.63/0.064

0.086/2.18

0.095/2.41

8

1.73/0.068

1.86/0.073

1.73/0.068

1.86/0.073

0.1/2.54

0.11/2.79

~7)DBVMX{9R8P{7F8S[TB6O.png  scan QR code to watch video


)`FQG7Y%BXGJ[(R]8F[TBQ2.jpg


Immediately Consult
Message *
Name *
Phone
Email *
Verification code *
 
Other Products

Related News

Contact Us
  • Tel: +8613328189886
  • Fax: 0086-519-86320910
  • E-mail: sales@czhechang.com
  • Contact person: Elva
  • Moblie(WeChat): 0086-13328189886
  • Skype: ding.dianaseason
  • Add: No18, Xinxing Road, Niutang Industry Zone, Wujin District, Changzhou, Jiangsu Province, China
  • Mobile
Designed by Zhonghuan Internet CopyRight © 2019-2020 Changzhou Hechang Machinery Co., Ltd. All Rights Reserved.   Sitemap  Alltag